Showing 1217–1232 of 1807 results

$493.00

20.0 Gallon 15-3/8″ x 31-5/8″. Floor stand models especially designed for residences. Requires only a minimum of floor space. Appliance-like blue finish allows installation anywhere.

Base Price $494.00

•10x54  Mineral Tank •1.5 cubic foot Coconut Shell Carbon •Distributor tube w/ Top Basket •Clack Upflow In/Out valve with bypass, and 1" inlet PVC connectors •NO Backwash Required!! •NO Electricity Required!! •NO Wasted Drain Water

Base Price $495.00

Fleck 2510 Specifications When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please [...]

Out of stock
Base Price $499.00

When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please measure your tank [...]

Base Price $499.00

7000 bypass valve 10×44 resin tank 1.0 cubic feet of resin 5 gpm service flow rate 5.5 gpm backwash flow rate Floor Space Required is 21x26x52 Available colors: 

Base Price $499.00

7000 bypass valve 10×44 resin tank 1.0 cubic feet of resin 9 gpm service flow rate 6 gpm backwash flow rate Floor Space Required is 11x26x52 Available colors: 

Base Price $499.00

Fleck 2750 Specifications When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please [...]

Base Price $499.00

10×44 resin tank 1.0 cubic foot of resin 5 gpm service flow rate 4.5 gpm backwash flow rate Floor Space Required is 11x14x51

Out of stock
Base Price $499.00

• THIS COMPLETE WATER SOFTENER COMES WITH: • .50 CUBIC FEET OF HIGH CAPACITY RESIN • 16,000 grain • (7X44) RESIN TANK • 11x11x38 brine tank w/safety float • BYPASS • COMPLETE SYSTEM (23X11X52) • 5600SXT ON-DEMAND CONTROL VALVE

$502.00

Note: Only full case quantity of (4) 10 lb. containers can be sent via ground shipping. (5 lb. container shown). Works with Fine or Coarse applications.

$505.00

A850 is a high capacity, organic fouling resistant, gelular, acrylic Type One, strongly basic anion resin, supplied in the chloride or hydroxide form as moist, tough, uniform spherical beads. A850 is intended for use in all types of deionization systems and chemical processing applications, where water temperatures do not exceed 90 Deg. F. Demineralization A850 [...]

$505.00

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AK Low Pressure Brackish Water Elements are selected when high rejection and low operating pressures are desired. These elements allow significant energy savings since good rejection is achieved at operating pressures as low as 100 [...]

Base Price $509.00

This System can be used for injecting Peroxide and Soda Ash, for raising the pH in your water..!! Stenner adjustable single head high pressure feed pump. Output range of 0.3 to 17 gallons per day, 100 psi. 44 rpm gear driven motor. Uses pump tube size #2. Complete pump system ready to install includes 20′ [...]

Big Bubba NonMetallic Filter Housing

Big Bubba BBH-150 2 Inch Filter Housing (BBH-150)

$509.00

$510.00

This air cell works on both the WellMate WM14 & WM14WB Pressure Tanks.