Parts
TROJAN SENSOR PART # 650580 Used on the following Trojan UV Units.. UV MAX D & UV MAX D-Plus UV MAX E & UV MAX E-Plus UV MAX F & UV MAX F-Plus UV MAX D & UV MAX D-Plus UV MAX PRO 7 & UV MAX PRO 15
Fleck Control Valve Parts part number order
Fleck tool that helps to install the Lower Seals and Spacers of the 2900 and 3150 Valves.
Fleck 3/4" Valves
When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please measure your tank [...]
Fleck 3/4" Valves
Fleck 2510 3/4 Inch Manganese Greensand System Timer Control Valve
Fleck 2510 Specifications When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please [...]
Commercial
1800 Brine Valve Assembly Includes: 11772 – Spring 11774 – Retaining Ring 18713 – Brine Valve Body 16497-01 – Brine Stem Assembly (Includes “O” Ring) 16498-01 – Stem Guide Assembly (Includes “O” Ring)
Replacement Media
Purolite A520E is a strong base anion exchange resin supplied in the chloride form as moist, tough, uniform spherical beads. It is especially useful in nitrate removal applications due to its ability to remove nitrates preferentially in the presence of sulfates and other divalent ions. The use of Purolite A4050 eliminates nitrate dumping and retains [...]
Commercial
This NHWBP (No Hard Water Bypass) Piston Does Not allow water to flow past the valve, during regeneration.
Fleck 3/4" Valves
Fleck 5600 3/4 Inch Water Softener System Meter Control Valve
Fleck 5600 Specifications When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please [...]
Fleck 9000 Control Valve Parts
Complete Fleck 9000 Power Head, including everything in the Drive & Timer Assemblies, with the Standard “0 – 2100” gallon meter program dial.
Optional 1″ Solenoid Kit. This solenoid will stop the water flow if the lamp fails.
The technology and care that goes into the development of our products is of the highest standards. The S5Q-PA system has been designed and tested against the most rigorous validation and testing methods in the industry. Most popular, cost effective UV disinfection system for recommended flow rates up to 6 GPM (23 lpm) Designed for [...]
1-1/4" Fleck Control Valves
Fleck 7000SXT High Flow Metered Water Softener Control Valve
This listing comes with: 7000 sxt metered control valve with flow meter for counting gallons and flow controls pre-installed in valve. Optional 1 or 1 1/4 inch bypass. Flow controls installed in valve. NOTE: THIS LISTING IS FOR CONTROL VALVE ONLY.
2 gallon, 8″x13″. Inline model that needs no floor space, can be conveniently installed in closets, under sinks, etc.
Replacement ballast for S24, S40, S65, S100, S225, S400 & S600 GPM units. 100-130v, 50-60hz.
50 lbs total. For use in dry pellet chlorinators including Sentry, Land-O-Matic and Sentry Open Air Systems.