Hot Water Mineral Tanks
Structural Fiberglass Hot Water Tank
SPECIAL ORDER: Plz allow 7 – 10 business days for delivery, once order has been placed. Assembly includes two 1-1/2″ Copper pipes, 4 “O”rings (17224), 2 coupling retainer (17061), 4 pipe couplings, (17052), and 8 screws (15137). If you have resin tanks larger than 16” diameter, please contact us by Phone at 888-644-6426, or by [...]
Chlorine Pumps
This versatile Flow Controller switch may be used to establish flow/no flow control of metering pumps in various applications. The pre-wired, self-contained flow switch is specifically designed for the water treatment industry. Turns feed pump on at 0.5 gpm with a maximum operating pressure of 150 psig.
For 36″ tanks. Includes an ABS hub and eight PVC slotted laterals with threaded adaptors.
Quality Purolite SST 60 “Salt Saving Technology” Softening ion exchange resin. For use in any water softening system, with Clear Water Iron up to 5 ppm, and will use 1/3 Less Salt than our Standard High Capacity & Fine Mesh Resins. 1 cubic foot. Purolite SST60 Specifications
Microline Reverse Osmosis System
4 Stage Reverse Osmosis System The 4-Stage drinking water system includes: Sediment/Carbon Pre-filter (S7028)m TFC 50 gpd membrane (S1229RS) (35 gpd +/- 7 gpd actual production based on TDS level), Activated Carbon Post-filter (S7025), GAC inline filter (S7206W-JG),3.1 gallon storage tank volume (1.8 gallon capacity), Long reach air-gap faucet, Automatic shutoff, Installation parts kit with instructions, 28-42 gallons per day of 'Bottled Water' quality water based on TDS level!, Unit dimensions are 15" H x 12" W x 4" D, Storage Tank dimensions are approx. 9.5" D x 17" H (with valve on top of tank), Max limit of 10 Grains Per Gallon Water Hardness, Less than 0.1 ppm Iron, pH 3 - 11, Max TDS - 2000 Owner's manual
30 lbs total. For use in dry pellet chlorinators including Sentry, Land-O-Matic and Sentry Open Air Systems.
This Assembly includes part numbers FL10909, FL16092, FL16395-01 and FL16436. PLEASE NOTE: Other versions of this piston assembly are available including the No Hard Water By- Pass (NHWBP) # FL60114-01 ).
Parts
TROJAN SENSOR PART # 650580 Used on the following Trojan UV Units.. UV MAX D & UV MAX D-Plus UV MAX E & UV MAX E-Plus UV MAX F & UV MAX F-Plus UV MAX D & UV MAX D-Plus UV MAX PRO 7 & UV MAX PRO 15
Fleck Control Valve Parts part number order
Fleck tool that helps to install the Lower Seals and Spacers of the 2900 and 3150 Valves.
Fleck 3/4" Valves
Fleck 2510 3/4 Inch Manganese Greensand System Timer Control Valve
Fleck 2510 Specifications When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please [...]
Commercial
1800 Brine Valve Assembly Includes: 11772 – Spring 11774 – Retaining Ring 18713 – Brine Valve Body 16497-01 – Brine Stem Assembly (Includes “O” Ring) 16498-01 – Stem Guide Assembly (Includes “O” Ring)
Replacement Media
Purolite A520E is a strong base anion exchange resin supplied in the chloride form as moist, tough, uniform spherical beads. It is especially useful in nitrate removal applications due to its ability to remove nitrates preferentially in the presence of sulfates and other divalent ions. The use of Purolite A4050 eliminates nitrate dumping and retains [...]
Fleck 3/4" Valves
When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please measure your tank [...]
Commercial
This NHWBP (No Hard Water Bypass) Piston Does Not allow water to flow past the valve, during regeneration.