Hallett Lamps & Sleeves
(Lamp length is approximately 25″)
Replacement ballast (detachable power cord sold separately) for SQ-PA, S1Q-PA, S2Q-PA, S5Q-PA, S8Q-PA, S12Q-PA.
(Riser tube not included). For 24″ tanks. 8 laterals.
Fleck 3/4" Valves
Fleck 5600 Specifications When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please [...]
Fleck 3/4" Valves
Fleck 5600 3/4 Inch Manganese Greensand 12 Day Timer Control Valve
Fleck 5600 Specifications When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please [...]
(Riser tube not included). For 30″ tanks. 8 laterals.
Lower Piston Assembly used on the Fleck 2900 and 2930 valves. This is the NHWBP version, DOES NOT permit Hard Water to Bypass the valve, during a regeneration cycle. This NHWBP (No Hard Water Bypass Piston), that will stop all water flow from getting past the control vavle, during the regeneration cycle. This Part can [...]
Residential
4 Stage or 5 Stage Reverse Osmosis System Available with 50, 75 or 100 GPD Membrane and dedicated dispensing faucet! Equipped with 3/8" delivery line for 56% higher flow to faucet. Also available as 5-stage system. DURAWATER RO BROCHURE RO MANUAL
Chlorine Pumps
In Stock (Tank Only) With Top Mount Cover. Rugged polyethylene construction for indoor or outdoor applications. 30 gallon capacity. Natural Color Only
Residential
Packages include 1″ Brass Cross, 1-1/4″ x 1″ PVC reducing Fitting, Square D Standard Duty Pressure Switch (FSG2), Pressure Gauge, 1/2″ Boiler Drain, 1/2″ Stop & Waste Valve, Relief Valve and Brass Nipples. 1-1/4″ version for WellMate models WM14WB, WM23, WM25WB, WM35WB.
(Riser tube not included). For 36″ tanks. 8 laterals.
When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please measure your tank [...]