Inline Filters
Options: 3/4 inch, 1 inch, High Flow 1 1/2 inch & 2 inch
Pro Products Supplies
Save 40% per bottle!
Commercial
Old Fleck Part # FL14772 – Motor Only- As shown on page 10 of our online 2900 Service Manual, Item # 3.
Microline Filters
This set includes one each of the S7028, S7025, and S1229RS membrane. This set also includes the 6″ in-line carbon post-filter. Choose S7206W with 3/8″ threaded connections (replaces S7206C and S7206C-06) or the newer S7206W-JG with 3/8″ tube connections during checkout. . Membrane Storage Tip – RO Membrane cartridges that will not be installed or [...]
Microline Filters
This set includes one each of the S7011, S7025 and S1224RS membrane. 10% off set discount applied. .Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)
Commercial
3″ Plastomer Bottom Diffuser Assembly Includes bottom diffuser and 3″ PVC female adapter. 3″ PVC Riser Pipe Not Included.
Commercial
This assembly is for applications using the Fleck 2850 Control Valve, and includes part numbers FL10909, FL16092, FL16395-001 and FL16436. This Part can be located on page 19, of the Fleck 2850 Service Manual.
Complete Service Assemblies
5600 Softener Rebuild/Combo Kit w/Brine Injector (OPW56KIT w/Brine Injector)
For Water Softeners & Manganese Greensand units. Includes: 1ea Standard Piston Assembly -FL60102-00 1ea Seal/Spacer Kit – FL60125 1ea Brine Valve – FL60032
Fleck Control Valve Parts part number order
Stainless Steel Backplate, used on the Fleck 2900 Valve.
This set includes one each of the S7028, S7025, and S1227RS membrane and will only work on Rayne TFC systems without the “-RC” suffix on the pre and post filters. This set also includes the 6″ in-line carbon post-filter. Choose S7206W with 3/8″ threaded connections (replaces S7206C and S7206C-06) or the newer S7206W-JG with 3/8″ [...]
Iron Removal Media
1/2 cubic foot. Birm is used to remove dissolved iron and manganese. The pH must be above 6.8 and dissolved oxygen content must be equal to 15% of the iron and manganese content. No regeneration is required, only periodic backwashing. Birm Specifications NOT FOR SALE FOR USE IN CALIFORNIA!Birm Product Update
Uncategorized
1 1/2″, 50gpm, 60 Mesh (254 micron). 1/2″ MIPT drain cleanout with cap. High impact, molded, non-corrosive filters with reusable polyester filter screens. Clear sump permits monitoring of trapped sediment.
1 1/2″, 50gpm, 100 Mesh (152 micron). 1/2″ MIPT drain cleanout with cap. High impact, molded, non-corrosive filters with reusable polyester filter screens. Clear sump permits monitoring of trapped sediment.