This set includes one each of the S7011, S7025 and S1224RS membrane and will only work on Rayne CTA systems without the “-RC” suffix on the pre and post filters. .Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination [...]
Nelsen Aqua and Nelsen Filtration
Nelsen Set of 3 filters for 2 Sump Housing Systems (NP5 + 32250125975 + Membrane)
S1229RS – Rayne TFC 50 gpd membrane. 2 year suggested replacement. .Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)
Fleck Control Valve Parts part number order
2 RPM Motor Used on the Fleck 5600SE, 5600SXT, 6600 and 6700 control valves 24v motor Fleck Part #16943 – 120 volt 60 hz 2 rpm, is OBSOLETE NOTE: This 2 RPM motor is now only available in 24 volt (Requires 24v Transformer Fleck Part #19674).
For 30″ tanks. Includes an ABS hub and eight PVC slotted laterals with threaded adaptors.
(Riser tube not included). For 21″ and 24″ tanks. 6 laterals.
Float Switches Valves
Used to control pumps, motors or other electrical devices. Normally Closed (NC) refers to the switch contacts when the bulb is hanging in a vertical position. Use NC to turn a device off with high level. 15 ft. cord.
Fleck Control Valve Parts part number order
Please Note: 24 Volt Timer Motor is 1/30 rpm. Old Part # FL13494 and FL19659, and will require a 24 volt AC transformer. The new motors will not look exactly like the older versions, but these motors are the replacement motors, supplied to us by the manufacturer. Also, this 24V motor will have a metal [...]
Fleck Control Valve Parts part number order
Used on the Fleck Commercial Valves
Fleck 9000 Control Valve Parts
Injector/ Drain Module used on the Fleck 9000 and 9100 control valves. Includes new injectors, o-rings, BLFC and DLFC, based on resin tank diameter.
Complete Service Assemblies
This 5600 injector assembly includes a new injector throat & nozzle, o-rings, BLFC & DLFC flow control buttons. The BLFC & DLFC buttons will be based on the diameter of your resin tank. Includes part numbers FL60032, FL13315 x2, FL13303, FL13163, FL10913U, FL10914, FL10227, FL13166, FL10329, FL10330, FL10332, BLFC Button, FL12977, FL13245, FL13244, FL12767, FL15348
Plumbing or threaded side of Bypass Valve or compression side of Bypass
Plumbing or threaded side of Bypass Valve or compression side of Bypass