Microline Filters
S1227RS – Microline TFC 25 gpd membrane. 2 year suggested replacement.Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)
BigBlue 20" Carbon
5 micron nominal extruded bituminous carbon block cartridge. 20,000 gallon chlorine reduction. 5 gpm maximum flow rate.
S1227RS – Rayne TFC 25 gpd membrane. 2 year suggested replacement. .Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)
Float Switches Valves
For open tank or sump applications. The contacts open on liquid rise. Optional 1/4″ x 60″ Brass Float Rod, plastic float and rubber float stop available during checkout.
Commercial
The 1600 Brine Valve is seldom used on the 9500, as it is only 3/8″ O.D. It may be used, if the resin tank is 16″ in diameter, or less. The larger 1/2″ O.D. (FL60039), is more commonly used on the 9500 valve. This is the part that normally needs to be replaced, if the [...]
Fleck Control Valve Parts part number order
Environmental Backplate – Fleck 2510 2750, 2850 Valves (18697)
Stainless Steel Backplate, used on the Fleck 2510 2750, 2850 Valves. Uses “Environmental” cover, PN 60219-02
Complete Service Assemblies
FLEC-DG New Style Cover with “Weather-Proof Seal, for Fleck 2850, 2900 & 9500 Fleck valves that have the special hinged back plate. Cover includes plastic hinge pin.
Complete Service Assemblies
1600 Brine Valve, Short Stem is commonly used in the Fleck 1500, 2500, 2750, 2850, 2900 valves. The piston assembly ( part #60029 ) should be replaced if the brine refill never stops. This Brine Valve is used with 3/8″ Brine Line Tubing, The 1600 ( or 3/8″ tubing size ), on softener tanks up [...]
Mineral Tanks Parts
3/4 Inch C Series Plastic Distributor Head with Fill Port (C1190FP)
Designed for simple in-out filters such as pH neutralizers and carbon filters. Fits 2-1/2″ NPSM tank opening. Has 3/4″ openings and 1.050″ distributor opening. Features a removable top, or fill port, and an internal screen. The screen is easily serviced and cleaned by using the service wrench, provided with each head, to disassemble the head. [...]
Brine Salt Tank Parts
FL60027 – Works with most Brine tanks, that use a 3/8″ brine line O.D. tube. This 2300 Brass Safety Brine Valve 3/8″ is used with float in the Brine tank, to help prevent water from over flowing, if the control valve should ever malfunction.
For 18″, 21″ or 24″ tanks. Includes an ABS hub and eight PVC slotted laterals with threaded adaptors.