Fleck 7000 Control Valve Parts

7000 BW Filter Piston Assembly, 61452-20

$150.00

7000 Backwashing Filter Piston Assembly, Down Flow, up to 35 GPM Flow Rate. Used for Backwashing Filters only; Calcite, Sediment, Birm, Carbon, ChemSorb…

$150.00

Use this Powerhead on backwashing CARBON, CALCITE, CHEMSORB, BIRM type filters, ONLY. DO NOT Use this Powerhead on a Water Softener. FL60353 Complete with 120 volt 60 Hertz 1/30 rpm Timer Motor, all internal gears, back cover and power cord.

$151.00

This is a Special Order item and may not be returned. Please allow up to 10 days for delivery.

$151.00

This is a Special Order item and may not be returned. Please allow up to 10 days for delivery.

$159.00

S740RL-HO. 15 gpm replacement lamp for SPV-15. 

$160.00

Packages include 1″ Brass Cross, Square D Standard Duty Pressure Switch (FSG2), Pressure Gauge, 1/2″ Boiler Drain, 1/2″ Stop & Waste Valve, Relief Valve and Brass Nipples. 1″ version for WellMate models WM4, WM6, WM9, WM12.

$161.00

Packages include 1″ Brass Cross, Square D Standard Duty Low Pressure Cut-out Switch (FSG2M4), Pressure Gauge, 1/2″ Boiler Drain, 1/2″ Stop & Waste Valve and Brass Nipples. 1″ version for Well-X-Trol models WX202 and WX203.

$161.00

This is a Special Order item and may not be returned. Please allow up to 10 days for delivery.

$165.00

Use Only On Water Softeners FL60353 Complete with 120 volt 60 Hertz 1/30 rpm Timer Motor, all internal gears, back cover and power cord.

$165.00

Used on Fleck “SE” & SXT Models – 5000, 5600, 2510, 9000, 9100 Electronic Metered valves. Includes clips, orings and screws. Optional Meter Cable for this Turbine Meter Assembly is part number 19791-01 and is sold separately. (FL19797 – Without SS Clips & Screws)

$165.00

For 5600 “L” bracket valves, Only. Complete with 120 volt 60 Hertz, 1/30 rpm Timer Motor, all internal gears, meter cable, back cover and power cord.

$167.00

Old Part #’s FL14927, FL18738 & FL42250 Drive Motor (FL18738 or FL61633-01), used on Fleck 9000,9100 & 9500 twin tank valves to operate pistons during regeneration cycle. If the valve gears are not turning, check the condition of the Middle Drive Gear (FL15135-02). If this gear is damaged, it can end up being the real [...]