Fleck 7000 Control Valve Parts
7000 Softener Piston Assembly, Down Flow, Up to 35 GPM Flow Rate
Complete Service Assemblies
Fleck Complete Meter Assembly 3/4 Inch Standard Range (FL60086)
Complete Meter Module includes meter cover, meter body, impeller, orings, mounting clips, and screws. This is the standard range 3/4″ meter used on residential Fleck Econominder Valves. This standard range meter has a program wheel with numbers 0 – 21 (0 – 2,100 gallons maximum capacity setting ).
Fleck 7000 Control Valve Parts
7000 Softener Piston Assembly, Down Flow, Up to 28 GPM Flow Rate
Complete Service Assemblies
FL60353-24 Complete with 24 volt, 1/30 rpm Timer Motor, all internal gears, back cover. Requires Transformer
Fleck 7000 Control Valve Parts
7000 Backwashing Filter Piston Assembly, Down Flow, up to 35 GPM Flow Rate. Used for Backwashing Filters only; Calcite, Sediment, Birm, Carbon, ChemSorb…
Complete Service Assemblies
5600 – 12 Day Timer Powerhead (FL56F-PH) 120V (For use On Backwashing Type Filters Only)
Use this Powerhead on backwashing CARBON, CALCITE, CHEMSORB, BIRM type filters, ONLY. DO NOT Use this Powerhead on a Water Softener. FL60353 Complete with 120 volt 60 Hertz 1/30 rpm Timer Motor, all internal gears, back cover and power cord.
Complete Service Assemblies
Fleck Complete Meter Assembly 3/4 Inch Rt Angle Standard Range (FL60088-180)
Complete Service Assemblies
5600 – 12 Day Timer Powerhead (FL56T-PH) 120V (For Use On Water Softeners, ONLY)
Use Only On Water Softeners FL60353 Complete with 120 volt 60 Hertz 1/30 rpm Timer Motor, all internal gears, back cover and power cord.
Complete Service Assemblies
Used on Fleck “SE” & SXT Models – 5000, 5600, 2510, 9000, 9100 Electronic Metered valves. Includes clips, orings and screws. Optional Meter Cable for this Turbine Meter Assembly is part number 19791-01 and is sold separately. (FL19797 – Without SS Clips & Screws)
Complete Service Assemblies
5600 Econominder Metered Powerhead “L” Bracket (FL56LM-PH) 120V
For 5600 “L” bracket valves, Only. Complete with 120 volt 60 Hertz, 1/30 rpm Timer Motor, all internal gears, meter cable, back cover and power cord.
Fleck 9000 Control Valve Parts
Old Part #’s FL14927, FL18738 & FL42250 Drive Motor (FL18738 or FL61633-01), used on Fleck 9000,9100 & 9500 twin tank valves to operate pistons during regeneration cycle. If the valve gears are not turning, check the condition of the Middle Drive Gear (FL15135-02). If this gear is damaged, it can end up being the real [...]
Complete Service Assemblies
Electronic Meter Cap, Only – (No Wiring) Includes 13847 “O” Ring, and is used on Fleck 3/4″, 1″, 1 1/2″ and 2 inch Electronic Meter Assemblies. This Fleck Part #14716 is used on the following Fleck Control Valves – 2750, 2850, 2900, 9000, 9100, 9500 and also on the XT or 3200 NXT timer/controllers.
Complete Service Assemblies
FL60354 Complete with 120 volt 60 Hertz, 1/30 rpm Timer Motor, all internal gears, meter cable, back cover and power cord.
Fleck Control Valve Parts part number order
New 7000SXT Circuit Board # 61969, replaces the old part SE #61460, that is no longer available. Older 7000 circuit boards were labeled PN 40595 & 41090
Complete Service Assemblies
Fleck 3200 12 – Day Timer Powerhead for Water Softeners, Manganese Greensand filters, & Backwashing Filters, using the Fleck 1500, 2500, 2510 and 2750 Valves. **Does not include Valve Body or the Brine Piston Assembly. NOTE: If you need a cover: This power head only uses the Environmental Cover with Hinge Pin, # FL60219-02 Older [...]
Fleck Control Valve Parts part number order
Circuit Board Only, (Used on 5600SXT Valve)