Showing 289–304 of 474 results

Complete Service Assemblies

5600 FL56C-G (Gray)

$25.00

Plastic Cover that simply slips over the top of the 5600 Powerhead, that helps protect it from Dust/Sun/Weather. Will Not work on the Electronic 5600SXT Model valve.

Fleck Control Valve Parts part number order

9000 Injector Drain Body (FL15215)

$25.50

Stripped 9000 Injector Drain Module Body You may want to also order the four new “O” rings listed, that are installed between the Injector Body and 9000 Valve body. (We have found that “O” Rings over 5 years old will generally not reseal.) 1ea – 13302, 1ea – 13303, 2ea – 13301

Fleck Control Valve Parts part number order

Meter Cable Assembly (FL15513)

$26.00

17.5″ Cable used on the Fleck 2750, 3150, & 3900 metered valves.

Fleck Control Valve Parts part number order

7000 Brine Valve Assembly FL60016-01

$27.00

7000 Brine Valve Assembly, 560CD

Fleck Control Valve Parts part number order

Yoke, Stainless, 3/4in (FL5607Y) (FL13708)

$28.00

3/4″ female NPT Stainless Steel Yoke for Fleck Valves. (Brass was used in the past)

Fleck Control Valve Parts part number order

Drive Gear (FL16046)

$28.00

Used on Fleck 3150 valve

Fleck Control Valve Parts part number order

Lower Environmental Backplate – Fleck 2900 (18709)

$29.00

Backplate, used on the Fleck 2900 Valves. Uses “Environmental” cover, PN 60217-02

$29.00

Set of 2 – 1-1/4 Inch, Elbows, 90 Degree, to be used on the Fleck 7000 Valve. Includes: 2ea PLastic Clips (FL40576) 2ea “O” Rings (FL40951) 2ea Elbow, 90 Degree, 1-1/4″ (na) Does not include the Bypass, 7000 control valve or Brass Fittings shown in image.

$29.00

Brass Sweat Connector 3/4″ inside and 1″ outside NPT w/oring (61626), used on Fleck 7000 and other Pentair Water Products.

Fleck 9000 Control Valve Parts

9500 Meter Cable, 20.75″ (FL17744)

$29.00

MECHANICAL METER CABLE, 20.75″ FL17744

Fleck Control Valve Parts part number order

DLFC Flow Control Housing (FL15177)

$30.00

Used on the Fleck 2750 valveFL60365-001/2″ x 3/4″

$31.00

Brass Sweat Connector 1″ inside and 1.25″ outside NPT w/oring (41242-01), used on Fleck 7000 and other Pentair Water Products. (FL70-1012CT)

Fleck Control Valve Parts part number order

SVO Body Assembly (FL10785)

$33.00

Fleck Control Valve Parts part number order

2750 Piston (FL14451)

$33.00

Used in the Fleck 2750 Piston Assembly (FL60090-HF)

$34.00

No Injectors are included in this assembly.

Complete Service Assemblies

Piston Assembly, Filter (FL60102-10)

$34.50

5600 Filter Piston Assembly used non-softening (Backwash Only) applications. ** Back Wash and Rapid Rinse cycle times will be 15 minutes each. Includes Part Numbers FL13852, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125