Used on Fleck 2750, 2850 & 2900S Control Valves This Part can be viewed on page 11, of our online Fleck 2900s Service Manual…

Select .25, .50, 100 GPM, BLFC size during checkout Used on 1650 Brine Assemblies

No Injectors are included in this assembly.

Main Piston Seals & Spacers used on newer 2510, 2700, 2750 valves and the 2900 upper piston. Also used on Older Fleck 1500, and 2500 valves.

Seals and Spacers Kit for the Fleck 5000, Proflo SE, and some others. Includes 5 Seals, 4 Spacers, and 1 Special End Spacer The Special End Spacer should be installed first, inside the valve body, followed by the a regular seal, and then alternating with spacers, and ending with a seal on top. Also used [...]

Only Parts shown in our online Picture, are included with this Brine Valve. Does not included BLFC fitting, (FL60010). Most folks re-use the old BLFC fitting. Most newer Fleck 2510 valves use this 1650 plastic Brine Valve Assembly.

10913-1 & 10914-1 – Yellow (13″ – 18″ Used on Diameter Tanks)

1600 Brine Valve, Short Stem is commonly used in the Fleck 1500, 2500, 2750, 2850, 2900 valves. The piston assembly ( part #60029 ) should be replaced if the brine refill never stops. This Brine Valve is used with 3/8″ Brine Line Tubing, The 1600 ( or 3/8″ tubing size ), on softener tanks up [...]

Used on Fleck 2900s (Upper Piston), If you have a 1 Piece “S” Casting, then you should use Fleck Part # 61540 Piston Assembly (With the Seal Kit # 61530), that has a longer Shaft. These Parts can be located on page 12, of the Fleck 2900s Service Manual, Items # 33 & 34.