Showing 977–992 of 1429 results

$255.00

Note: Only full case quantity of (6) 28 oz containers can be sent via ground shipping. (5 lb. container shown). Works with Fine or Coarse applications.

Base Price $255.00

When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please measure your tank [...]

$256.00

Motor Complete – Includes motor, switch, fuses, and motor shaft seal.

$261.00

Packages include 1″ Brass Cross, Square D Standard Duty Pressure Switch (FSG2), 1/2″ Pressure Gauge, 1/2″ Boiler Drain, Stop & Waste Valve, Relief Valve and Brass Nipples. 1-1/4″ version for Well-X-Trol models WX205, WX250, WX251, WX252, WX255, WX302, WX350.

$263.00

Used on Fleck Models 9000, 9100 & 9500 Twin Tank Metered Assembly. The program meter wheel is located on the front and timer motor on back of this assembly. Has the standard range program wheel showing 125 – 2,100 gallons. Plz contact us if your Assembly has one of these a higher gallon range lables [...]

Base Price $265.00

Fleck 5600 Specifications When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please [...]

Out of stock
$269.00

The Sterilight S2Q-PA Ultraviolet Disinfection System is rated at 3 gpm.

$269.00

30 lbs total. For use in dry pellet chlorinators including Sentry, Land-O-Matic and Sentry Open Air Systems.

Base Price $272.00

This tank features a 1-1/4 inch dome hole with plug. This dome hole is especially useful for replenishing the resin bed (calcite, etc.) without having to remove the valve.

$279.00

(4) QS-012. 40 gpm units. (Includes 2 o-rings). (NOTE” Only one sleeve shown) 

$280.00

Quality Purolite SST 60 “Salt Saving Technology” Softening ion exchange resin. For use in any water softening system, with Clear Water Iron up to 5 ppm, and will use 1/3 Less Salt than our Standard High Capacity & Fine Mesh Resins. 3/4 cubic foot. Purolite SST60 Specifications

$280.00

A850 is a high capacity, organic fouling resistant, gelular, acrylic Type One, strongly basic anion resin, supplied in the chloride or hydroxide form as moist, tough, uniform spherical beads. A850 is intended for use in all types of deionization systems and chemical processing applications, where water temperatures do not exceed 90 Deg. F. Demineralization A850 [...]

$280.00

1/2 cubic foot, 57 lbs. per bag. High performance media for iron, hydrogen sulfide, and manganese removal. No oxidizing chemicals needed for regeneration, only periodic backwashing. Filoxâ„¢ out performs traditional media such as Birm® and Greensand. Highest flow rate of any standard iron removal media, 6 gpm/cu.ft service flow; pH range is 5 – 9. [...]

Base Price $283.00

This tank features a 1-1/4 inch dome hole with plug. This dome hole is especially useful for replenishing the resin bed (calcite, etc.) without having to remove the valve.