Showing 929–944 of 1429 results

$185.00

Made in the USA Quality Purolite C100E Softening ion exchange resin for use in any water softening system, with Clear Water Iron levels up to 3 ppm. 1 cubic foot. Purolite C100E Specifications

Out of stock
$188.00

This low voltage pump is designed to operate continuously at near constant pressure until the product water tank is full. The output pressure is dependent on the reverse osmosis system’s total flow requirement, feed water pressure and available power source. These booster pumps are to be installed on the raw water line feeding the RO [...]

$189.00

Fleck 3200 12 – Day Timer Powerhead for Water Softeners, Manganese Greensand filters, & Backwashing Filters, using the Fleck 1500, 2500, 2510 and 2750 Valves. **Does not include Valve Body or the Brine Piston Assembly. NOTE: If you need a cover: This power head only uses the Environmental Cover with Hinge Pin, # FL60219-02 Older [...]

Fleck Control Valve Parts part number order

SXT Circuit Board (FL61673-0201)

$189.00

Circuit Board Only, (Used on 5600SXT Valve)

$190.00

Fine mesh Cation Softening ion exchange resin for use in any water softening system, with Clear Water Iron levels between 4-8 ppm. 1 cubic foot.Cation Resin Specifications Cation Resin MSDS

Fleck Control Valve Parts part number order

Meter Cover Assembly, Brass, (Extended) (FL15237)

$190.00

(Picture shown, is a Standard Brass Meter Cover). Brass Meter Cover, used on the Fleck 2750, 2900, 3150, 9000 & 9500 valves. Plz specify what the gallon range is, on your existing meter dial, when placing order. Normally installed on larger systems, that has a Meter Dial that reads from 1,550 to 26,350 gallons. Will [...]

$190.00

“SXT” Timer Assembly Only – This SXT modual (Fleck Part 42778), can also be used to replace the old “SE” electronic modual, used on the Fleck 2510, 2750 & 2850 control valves.

$192.00

The Commercial Potassium Permanganate tank (18″x33″) is used with a filter containing Manganese Greensand. A recommended dose of 2-4 ounces of Potassium Permanganate per cubic foot of Manganese Greensand is suggested for regeneration. The tank has a liquid capacity of 20 gallons. 1.) 18″ x 33″ Brine Tank w/Salt Grid 2.) Pad on top of [...]

$195.00

Complete 5600SXT Circuit Board with Front Cover used to replace the old SE Front Cover and circuit board. This part is very simple to replace…! We have different “SXT” Control covers available for the following Fleck control valves that have the old “SE” modual, as shown. ProFlowSE 5600SE 2510SE 9100SE

Out of stock

Fleck Control Valve Parts part number order

1″ Meter Cover Assembly, Brass, (Standard) (FL15218)

$195.00

Brass Standard Range Meter used on the following Fleck Valves: 2750,2850,2900,2900S,9000 or 1″,9100 3/4″ or 1″ FL15218 is the brass meter cap assembly for a 3/4″ to 2″ mechanical meter assemblies -(usually for HW or Cold water) When used on the Fleck 1-1/2 ” 2850 & 9500 valves, Meter range is from, 0 – 100 x [...]

Fleck Control Valve Parts part number order

Puller Tool Assembly, 2850 & 9500 Valves (FL17623)

$195.00

Tool used to make removal of Seals and Spacers in the Fleck 2850 and 9500 Valves easier.

$195.00

Our 10% High Capacity Cation Softening ion exchange resin is more Chlorine Resistant than our Standard 8% Crosslink High Capacity Resin. For use in any water softening system, with a Chlorinated Water Supply. Will also remove up to 3 ppm of Clear Water Iron 1.0 cu/ft.Cation CR10 Specifications Cation Resin MSDS

Out of stock

Professional Test Kits and Supplies

Hach HA62A Test Kit with Color Wheels

$197.00

Hardness, Iron and pH test kit Hach catalog number 1837-01 Sturdy carrying case 100 FerroVer Iron Reagent Powder Pillows 100 ml Buffer Solution Hardness 1 100 ml ManVer Hardness Indicator Hardness 2 100 ml Titrant Solution Hardness 3 100 ml Phenol Red Indicator Solution Color Comparator Iron Color Disc 0-10 mg/l pH Color Disc 6.5-8.5 [...]

$197.00

Complete Power Head with Standard Range (0 – 2100 gallons) 3210 Metered Timer assembly for Fleck 1500, 2500, 2510 and 2750 Valves. **Does not include Valve Body or the Brine Piston Assembly. NOTE: If you need a cover: This power head only uses the Environmental Cover with Hinge Pin, # FL60219-02 Older Style covers that [...]

Complete Service Assemblies

2750 Brass Valve Body, (Stripped) FL14749

$199.00

Solid Brass Valve Body, 2750

Out of stock
$204.00

Optional 1″ Solenoid Kit. This solenoid will stop the water flow if the lamp fails.