Showing 833–848 of 1429 results

$114.00

1/2 cubic foot. Centaur is outstanding in VOC removal, taste and odor control and in operating efficiency when compared with traditional activated carbons. Centaur Carbon Specifications

$115.00

Our 10% High Capacity Cation Softening ion exchange resin is more Chlorine Resistant than our Standard 8% Crosslink High Capacity Resin. For use in any water softening system, with a Chlorinated Water Supply. Will also remove up to 3 ppm of Clear Water Iron 1/2 cu/ft.Cation CR10 Specifications Cation Resin MSDS

$115.00

1/2 cubic foot, 33 lbs. per bag. High performance media for iron, hydrogen sulfide, and manganese removal. No oxidizing chemicals needed for regeneration, only periodic backwashing. Katalox Light®-media can be used in a pH range of 5.8 – 10.5. Recommended flow rates are based on the concentration of the iron, manganese and other mentioned contaminant [...]

$117.00

Legs on Grid are 10″ Tall

Brine Salt Tanks

Square 11x11x38 Brine Tank

Base Price $119.00

Includes Brine Well & Safety Float.

$120.00

Nelsen Iron Blend, a combination of Filter Ag and Birm, is the standard media for our Terminator Systems. Birm Specifications Filter Ag Specifications

$120.00

Fine mesh Cation Softening ion exchange resin for use in any water softening system, with Clear Water Iron levels between 4-8 ppm. 1/2 cubic foot.Cation Resin Specifications Cation Resin MSDS

Out of stock
$120.00

1 cubic foot. Coconut shell carbon, because it is comprised of predominantly microporous structures, is a superior performing product for the removal of chlorine, chlorinated solvents and VOCs. It is also harder and can stand up to more backwashing than bituminous coal based carbon. 12 x 30 Mesh. Carbon Specifications

$122.00

Note: Only full case quantity may be ordered. (Quart container shown in picture).

$125.00

High Capacity Cation Softening ion exchange resin for use in any water softening system, with Clear Water Iron levels up to 3 ppm. 3/4 cubic foot.Cation Resin Specifications Cation Resin MSDS

$125.00

3/4 cubic foot. Birm is used to remove dissolved iron and manganese. The pH must be above 6.8 and dissolved oxygen content must be equal to 15% of the iron and manganese content. No regeneration is required, only periodic backwashing. Birm Specifications NOT FOR SALE FOR USE IN CALIFORNIA!Birm Product Update