Out of stock
$63.00

S1229RS – Rayne TFC 50 gpd membrane. 2 year suggested replacement. .Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)

Fleck Control Valve Parts part number order

Drive Motor 2 RPM 24V 50/60 Hz (FL16944)

$63.00

2 RPM Motor Used on the Fleck 5600SE, 5600SXT, 6600 and 6700 control valves 24v motor Fleck Part #16943 – 120 volt 60 hz 2 rpm, is OBSOLETE NOTE: This 2 RPM motor is now only available in 24 volt (Requires 24v Transformer Fleck Part #19674).

$64.00

Used to control pumps, motors or other electrical devices. Normally Closed (NC) refers to the switch contacts when the bulb is hanging in a vertical position. Use NC to turn a device off with high level. 15 ft. cord.

Fleck Control Valve Parts part number order

2510 Valve Body (FL19328)

$64.00

Fleck Control Valve Parts part number order

Motor, 24V 60Hz (FL19659-1)

$64.00

Please Note: 24 Volt Timer Motor is 1/30 rpm. Old Part # FL13494 and FL19659, and will require a 24 volt AC transformer. The new motors will not look exactly like the older versions, but these motors are the replacement motors, supplied to us by the manufacturer. Also, this 24V motor will have a metal [...]

Fleck Control Valve Parts part number order

Fleck Brass DLFC Flow Control Housing (FL60701-25)

$64.00

Used on the Fleck Commercial Valves

Fleck 9000 Control Valve Parts

Fleck Injector/Drain Assembly (FL60385)

$64.00

Injector/ Drain Module used on the Fleck 9000 and 9100 control valves. Includes new injectors, o-rings, BLFC and DLFC, based on resin tank diameter.

Complete Service Assemblies

5600 Injector Assembly (FL60084-0132)

$64.50

This 5600 injector assembly includes a new injector throat & nozzle, o-rings, BLFC & DLFC flow control buttons. The BLFC & DLFC buttons will be based on the diameter of your resin tank. Includes part numbers FL60032, FL13315 x2, FL13303, FL13163, FL10913U, FL10914, FL10227, FL13166, FL10329, FL10330, FL10332, BLFC Button, FL12977, FL13245, FL13244, FL12767, FL15348

$65.00

Plumbing or threaded side of Bypass Valve or compression side of Bypass

$65.00

Plumbing or threaded side of Bypass Valve or compression side of Bypass

Basket Risers Riser Tubes and Distributor Tubes

13/16 Inch by 54 Inch Standard Mesh Basket Riser (BRT1316-54)

$65.00

$65.00

(Previously called Pro Yellow Out and Pro Laundry Whitener) Save 33% per bottle!

Out of stock
$66.00

1/2 cubic foot. Coconut shell carbon, because it is comprised of predominantly microporous structures, is a superior performing product for the removal of chlorine, chlorinated solvents and VOCs. It is also harder and can stand up to more backwashing than bituminous coal based carbon. 12 x 30 Mesh. Carbon Specifications

Complete Service Assemblies

Fleck High Flow Piston Assembly (FL61540)

$66.00

Used on Fleck 2900s (Upper Piston), If you have a 1 Piece “S” Casting, then you should use Fleck Part # 61540 Piston Assembly (With the Seal Kit # 61530), that has a longer Shaft. These Parts can be located on page 12, of the Fleck 2900s Service Manual, Items # 33 & 34.

Fleck Control Valve Parts part number order

Meter body, (Stripped) (FL13821)

$67.00

Stripped 3/4″ Meter Body. Includes 4ea Adapter “O” Rings (FL13305), only. All other parts for this meter body should be purchased separatley. This plastic 3/4″ meter Body commonly used on 5600, 2510 & 9000 valves.