Showing 625–640 of 1429 results

$50.00

FL 13398 Stainless Steel Yokes have replaced the old Brass Yokes that were used in the past, and will fit on the Fleck 5600, 6600, 6700, 2510, 9000-3/4″ and the 9100 valves.

$50.00

S1224RS – Microline CTA 14 gpd membrane. 2 year suggested replacement.Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)

$50.00

1/2 cubic foot. Filter Ag is a very efficient filter medium for the removal of suspended material and turbidity. Less pressure loss and finer filtration is possible because of its light weight and irregular surface characteristics. Filter Ag Plus Specifications

Basket Risers Riser Tubes and Distributor Tubes

1.050 Inch by 54 Inch Fine Mesh Basket Riser (BRT1050-54-FR)

$50.00

Basket Riser for all Mineral Tanks 54″ and shorter using Fine Mesh resin. (Basket only shown in picture)

$50.00

Fleck 2310 Brine valve assembly including valve, float assembly, and 34″ air check. The elbow connection is for 3/8″ Tubing.

Miscellaneous Parts

Deep Well Air Release (DWAR)

$50.00

1-1/4″ Cast Body. Maintains proper ratio of air to water in submersible water systems utilizing a bleed-back type of air control system.

Complete Service Assemblies

Piston Assembly, Standard (FL60102-00)

$50.00

For Water Softeners & Manganese Greensand units. ** Back Wash and Rapid Rinse cycle times will be 10 minutes each. Standard Piston Assembly for Fleck 5600 valves used since 1979, will have a White Cap. Includes Part Numbers FL13247, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125

$50.00

Desal Osmonics 36 gpd membrane, part number 1224436. NOTE: The membrane shipped may be Applied Membranes model number M-T1812A36-CUL due to product availability. May be used in Culligan reverse osmosis systems AC15, AC30, AC50, H30PRVC, H30SR, H8, H82, H83, H83S-R, and LC50. .Membrane Storage Tip – RO Membrane cartridges that will not be installed or [...]

$50.00

The standard for the industry for controlling electrically driven water pumps. Adjustable. 1 hp, 1/4″ FIPT. Set to 30-50 PSI.

Fleck Control Valve Parts part number order

2510 Adapter Base, 2-1/8 – 8 Thd. (FL19322)

$50.00

Please Note:Tank “O” Ring (FL18303) & Slip Ring (FL19197) used with this Adapter Base, ARE NOT INCLUDED on this part. Used on Standard Resin Tank openings (2 1/2″ x 8 thread).

Float Switches Valves

Level Float Switch (LFS4400-05)

$52.00

Features a strong Alnico bar magnet hermetically-sealed inside so no other wetted material can contaminate liquid or be attacked by a corrosive liquid. Special molded thread helps when metal to plastic installations are used. Unique assembly procedure eliminates stress by actually suspending the reed switch allowing for thermal expansion and contraction. Round pivot pins add [...]

Out of stock
$52.00

S1224RS – Rayne CTA 14 gpd membrane. 2 year suggested replacement. .Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)

Fleck Control Valve Parts part number order

Transformer, 24V (FL19674)

$52.00

Used on Fleck Models 5000, 5600, 2510 & 8500 valves with the “SXT” Electronic Displays.

BigBlue 10" Carbon

MAXCYST-FF975

$53.00

Long life + cysts 4-5/8 inch OD 9-3/4 inch Length 0.5 micron nominal rating 50000 gallons of Chlorine Reduction tested at 2 ppm of chlorine 3 gpm flow rate