Spindown Parts
Replacement Filter Screen for VuFlow 2 inch 100 mesh T Profile Sand Separator (FS200100)
152 Micron Filtration 10″ Long
Pro Products Supplies
Use 3 ounces of Softener Mate, per cu/ft of resin, mixed with at least 1 quart of warm water for softener units less than 2 cuft, and up to 3 – 5 gallons of warm water, for larger commercial units.
BigBlue 20" Carbon
Fits any housing that uses 4-1/2″ x 20″ cartridges 4 gpm flow rate
Fleck Control Valve Parts part number order
Empty 5600 Power Head, Standard Housing w/PIN
Complete Service Assemblies
10913-1 & 10914-1 – Yellow (13″ – 18″ Used on Diameter Tanks)
Basket Risers Riser Tubes and Distributor Tubes
32mm Standard Mesh Basket Riser for Fleck 7000 Valves Only (BD32MM + DT32MM-72)
Pro Products Supplies
This Feeder automatically adds about 1 ounce of ResCare Cleaner, each time the unit regenerates, and holds one quart of Liquid Cleaner. Res-Up Feeders are simple to install and operate. Res-Up Feeder Installation Instructions
FL13708 This Stainless Steel Yoke has 3/4″ Female threads, and is designed to be used on the Fleck 5600, 6600, 6700, 2510, 9000-3/4″ and the 9100 valves.
FL 13398 Stainless Steel Yokes have replaced the old Brass Yokes that were used in the past, and will fit on the Fleck 5600, 6600, 6700, 2510, 9000-3/4″ and the 9100 valves.
Microline Filters
S1224RS – Microline CTA 14 gpd membrane. 2 year suggested replacement.Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)
Replacement Media
1/2 cubic foot. Filter Ag is a very efficient filter medium for the removal of suspended material and turbidity. Less pressure loss and finer filtration is possible because of its light weight and irregular surface characteristics. Filter Ag Plus Specifications
Basket Risers Riser Tubes and Distributor Tubes
1.050 Inch by 54 Inch Fine Mesh Basket Riser (BRT1050-54-FR)
Basket Riser for all Mineral Tanks 54″ and shorter using Fine Mesh resin. (Basket only shown in picture)