Showing 369–384 of 1429 results

Fleck Control Valve Parts part number order

Drive Gear Middle (FL15135)

$20.50

Used on the Fleck 9000, 9100 & 9500 Valves. Always check the Condition of this Middle Drive Gear, as it may be the reason that the valve is not turning. Sometimes, this Gear will strip, because the Main Pistons and Seals, need to be replaced.

$21.00

5 micron sediment pre-filter for all Nelsen Aqua Classic, Aqua Elite, and Nelsen Filtration Reverse Osmosis Systems. 1 year suggested replacement.

$21.00

Activated Carbon Cartridge prefilter for Flowmatic FMRO5MMT Reverse Osmosis System. 1 year suggested replacement.

$21.00

Use 3 ounces of Softener Mate, per cu/ft of resin, mixed with at least 1 quart of warm water for softener units less than 2 cuft, and up to 3 – 5 gallons of warm water, for larger commercial units.

$21.00

Bracket for Nelsen Whole House 10″ & 20″ housings. Mounting screws included.

Fleck Control Valve Parts part number order

Brass 1600 BLFC 1.0GPM (FL60020-100)

$21.00

1600 Brass Brine Line Flow Control (BLFC) has a 1.00 BLFC Button included. Used on Brine Valve Piston Assembly of the Fleck 1500, 2500, 2750 and 3600 water softeners.

Fleck Control Valve Parts part number order

Brass 1600 BLFC .25GPM (FL60020-25)

$21.00

1600 Brass Brine Line Flow Control (BLFC) has a 0.25 BLFC Button included. Used on Brine Valve Piston Assembly of the Fleck 1500, 2500, 2750 and 3600 water softeners.

Fleck Control Valve Parts part number order

Brass 1600 BLFC .50GPM (FL60020-50)

$21.00

1600 Brass Brine Line Flow Control (BLFC) has a 0.50 BLFC Button included. Used on Brine Valve Piston Assembly of the Fleck 1500, 2500, 2750 and 3600 water softeners.

Fleck Control Valve Parts part number order

Clamp Assembly (FL60503)

$21.00

Used on The Fleck 2510 Valve

Out of stock
$21.00

Stage 1 and 2: A combination filter, with 20 micron mesh and granular activated carbon, removes dirt and rust while reducing chlorine and organic compounds. (Replace every 6-12 months).

Fleck Control Valve Parts part number order

Fleck Turbine Meter Harness, Only (FL19791-01)

$21.25

Flow Meter Harness Assembly, used on the Fleck SE & SXT valves ( 5600, 2510, 7000 & 9100 ), part number 19791-01 . Used with electronic turbines 60626 & 40577 (sold separately).

$22.00

2 1/2″ by 10″ funnel for loading media in standard tanks.

Out of stock

Standard 10" Sediment

FlowMax 0.35 micron (FM-0.35-975)

$22.00

4 gpm flow rate 2-3/4 x 9-3/4

Out of stock

Standard 20" Sediment

FlowMax 5 micron (FM-5-20)

$22.00

14 gpm flow rate 2-3/4 x 20

Out of stock

Standard 20" Sediment

FlowMax 20 micron (FM-20-20)

$22.00

16 gpm flow rate 2-3/4 x 20

Standard 20" Sediment

Wound 1 micron (SF1-20)

$22.00

9 gpm flow rate 2-1/2 x 20