Showing 17–32 of 68 results

Out of stock
$80.50

ChemSorb Filter Granules are used as a water/liquid, filter bed (or tank) material in lieu of sand/anthracite, pecan shells or other, coarse filtration material to efficiently remove suspended solids and fine turbidity particles. The filter granules physically filter and trap the suspended solids. In addition, the granules remove a wide range of colloidal and soluble, [...]

$85.00

1 cubic foot. Filter Ag is a very efficient filter medium for the removal of suspended material and turbidity. Less pressure loss and finer filtration is possible because of its light weight and irregular surface characteristics. Filter Ag Plus Specifications

$90.00

1/2 cubic foot. Birm is used to remove dissolved iron and manganese. The pH must be above 6.8 and dissolved oxygen content must be equal to 15% of the iron and manganese content. No regeneration is required, only periodic backwashing. Birm Specifications NOT FOR SALE FOR USE IN CALIFORNIA!Birm Product Update

$91.00

1/2 cubic foot. Low pH, Acidic water slowly dissolves Calcite media, to help raise the pH from 5.0 to 7.0. As the Calcite media dissolves, it will also increase the hardness of your water. (I.E. If your pH level is 6.0, the Calcite media will increase your water hardness 4 – 5 grains per gallon, [...]

$91.00

.38 cubic foot bag, 50 lbs. #8-12 Garnet is a high hardness, high density filter material used as a support bed in backwashing filters with heavy medias such as Filox, Pyrolox, Calcite, Filter Sand, Chemsorb, Birm & Greensand. Garnet Specifications

$91.00

.38 cubic foot bag, 50 lbs. #8 Garnet is a high hardness, high density filter material used as a support bed in backwashing filters with heavy medias such as Filox, Pyrolox, Calcite, Filter Sand, Chemsorb, Birm & Greensand. Garnet Specifications

$91.00

.36 cubic foot bag, 50 lbs. #30-40 Garnet is a high hardness, high density filter material used as a support bed in backwashing filters with heavy medias such as Filox, Pyrolox, Calcite, Filter Sand, Chemsorb, Birm & Greensand. Garnet Specifications

Out of stock
$93.00

3/4 cubic foot. Coconut shell carbon, because it is comprised of predominantly microporous structures, is a superior performing product for the removal of chlorine, chlorinated solvents and VOCs. It is also harder and can stand up to more backwashing than bituminous coal based carbon. 12 x 30 Mesh. Carbon Specifications

$95.00

Made in the USA Quality Purolite C100E Softening ion exchange resin for use in any water softening system, with Clear Water Iron levels up to 3 ppm. 1/2 cubic foot. Purolite C100E Specifications

$100.00

High Capacity Cation Softening ion exchange resin for use in any water softening system, with Clear Water Iron levels up to 3 ppm. 1/2 cubic foot.Cation Resin Specifications Cation Resin MSDS

$100.50

3/4 cubic. Activated Carbon 12 x 40 is an excellent filtration medium with excellent adsorptive properties. Used for the removal of taste and odors, chlorine, etc. Periodic backwashing is required in down-flow filters. Maximum carbon life is usually three years. This activated carbon is ‘water washed’ and much cleaner than many products found on the [...]

$101.00

An excellent medium density filtration media which works well in multi-media filter applications. Provides higher service flow rates and longer filter runs than equivalent sand filters. Anthracite Specifications

Out of stock
$101.00

ChemSorb Filter Granules are used as a water/liquid, filter bed (or tank) material in lieu of sand/anthracite, pecan shells or other, coarse filtration material to efficiently remove suspended solids and fine turbidity particles. The filter granules physically filter and trap the suspended solids. In addition, the granules remove a wide range of colloidal and soluble, [...]

Softener, Tannin & Nitrate Resin

Indion Fine Mesh Water Softener Resin 0.5 Cubic Ft

$105.00