1600 Brine Valve (FL60037)

The 1600 Brine Valve is seldom used on the 9500, as it is only 3/8″ O.D. It may be used, if the resin tank is 16″ in diameter, or less. The larger 1/2″ O.D. (FL60039), is more commonly used on the 9500 valve. This is the part that normally needs to be replaced, if the brine refill never stops. Plz NOTE: The Brine Line Flow Control, is sold separately. You should be able to re-use the one that is currently in use. This Part can be located on page 16, of the Fleck 9500 Service Manual.